View FX15SC-51S-05SH_7566809.PDF datasheet online --- IC-ON-LINE

Datasheet File OCR Text:

b273 1mm pitch cable-to-board connectors supporting lvds signal fx15 series contacts consolidated into 1 row for equal length transmission lines mating side: 1 mm pitch, staggered 2-row construction termination side: 0.5 mm pitch, 1-row construction features 1. space saving reduction in space is achieved by designing the contacts in 2-row staggered 1 mm pitch on the mating side and on a single row 0.5 mm pitch on the termination side (fig. 1). 2. equal length transmission lines contact configuration creates equal length transmission lines preventing deterioration of lvds signal within the connector (fig.1). 3. different types availability of types with or without metal shields allows flexibility of applications and cost reduction. 4. self alignment and self-guiding built-in guide posts allow secure self-alignment within 1.5 mm (fig.2). 5. secure and complete mating / unmating side latch-locks assure and confirm complete and secure mating of plugs to receptacles while permitting ease of disconnection (fig. 3). 6. enhanced shielding effectiveness availability of version with enlarged metal shields (preventing intrusion or emission of the electromagnetic interference) further protects the integrity of lvds signal (fx15s series, fig.4) 7. rohs compliant all components and materials comply with the reqirements of eu directive 2002/95/ec. applications fpd-tv, fpd panels and other applications requiring secure and reliable connection and transmission signal integrity. space saving, equal length transmission lines patent pending 0 0.1 0.2 0.3 0.5 1 2 3 1.5 -10 -20 -30 -40 -50 frequency (ghz) with metal without metal emission noise level (dbm) high shielding effectiveness fig.1 self-alignment of ?.5 mm side latch -locks large guide post 1.5mm 1.5mm 1.5mm with metal shields (fx15 and fx15s series) without metal shields (fx15m series) fig.2 fig.3 fig.4 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b274 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal 1 ma 100v dc 300v ac/one minute with corresponding connector 50 cycles frequency: 10 to 55 hz, single amplitude of 0.76mm, 2 hours, 3 axis acceleration of 490m/s 2 , 11ms durations, sine half-wave waveform, 3 cycles, 3axis. 96 hours at 40?, rh 90% to 95% temperature : -55? +15? to +35? +85? +15? to +35? time : 30 5 30 5 (minutes) 5 cycles 5% water solution for 48 hours. 60 m ohms max. (note 3) 500 m ohms min. no flashover or insulation breakdown. 0.2n min., 30n max. contact resistance: 80 m ohms max . (note 3) no electrical discontinuity of 1 s or more. no electrical discontinuity of 1 s or more. contact resistance: 80 m ohms max. no damage, cracks, or parts dislocation. (note 3) contact resistance: 80 m ohms max. (note 3) insulation resistance: 500 m ohms min. contact resistance: 80 m ohms max. (note 3) no corrosions ordering information product specifications ratings current rating voltage rating 0.5a 100v ac operating temperature range storage temperature range -55? to +80? (note 1) -10? to +60? (note 2) 1. contact resistance 2. insulation resistance 3. withstanding voltage 4. insertion-extraction force 5. durability (mating/un-mating) 6. vibration 7. shock 8. humidity 9. temperature cycle 10. salt spray item specification conditions note 1: includes temperature rise caused by current flow. note 2: the term storage refers to products stored for long period of time prior to mounting and use. operating temperature r ange and humidity range covers non-conducting condition of installed connectors in storage, shipment or during transportation. note 3: includes wire conductor resistance (12mm long). note 4: information contained in this catalog represents general requirements for this series. contact us for the drawings and specifications for a specific part number shown. materials and finishes receptacle ul94v-0 --------------- --------------- --------------- material finish remarks component insulator contact metal shields (with shields) metal fittings (without shields) polyamide phosphor bronze fx15s : nickel silver fx15sc : stainless steel phosphor bronze color: black contact area: gold plated termination area: tin plated fx15s : --------------- fx15sc : tin plated selective gold flash plated ul94v-0 --------------- --------------- --------------- --------------- material finish remarks component insulator contact metal shields (with shields) metal latch-locks (with shields) metal shields, metal latch-looks (micro-coaxial cable) polyamide phosphor bronze nickel silver stainless steel stainless steel color: black contact area: gold plated termination area: tin plated --------------- --------------- nickel plated plug fx15 s - 31 s - 0.5 sh 1 6 3 2 4 5 receptacle fx15 s - 31 p - c 1 3 2 4 7 plug fx15 - 3032 pcf b 1 2 9 8 10 crimp contact 1 2 3 4 5 6 7 8 9 10 series name configuration number of contacts connector type contact pitch housing configuration termination applicable conductor packaging plating (contact area) : fx15 blank : with shields (or crimp contact) 15s : with shields C enhanced shielding 15sc : with shields C enhanced shielding (pcb mounting pattern : vesa standard) 15m : without shields p : male contact s : female contact : 0.5 mm sh : right angle sv : straight c : crimp 0.5sd : micro-coaxial cable gnd : separate ground plate 2830 : awg 28 to 30 3032 : awg 30 to 32 pcf : reel/ plug contact b : gold plated the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b275 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal fx15 series ?mating diagram crimp contact crimp contact (fx15-3032-pcfb) crimp contact (fx15-2830-pcfb) plugs receptacles b b b without shields (fx15m-p-c) right angle, with shields Cenhanced shielding (fx15s-s-0.5sh) with shields C enhanced shielding (fx15s-p-c) right angle, without shields (f x15m-s-0.5sh) with shields C enhanced shielding pcb mouting pattern : vesa standard (f x15sc-s-0.5sh) with shields C enhanced shielding pcb mouting pattern : vesa standard (f x15sc-s-0.5sv) 28 with shields C enhanced shielding awg#28 to 30 (f x15sw-31p-c) a micro-coaxial cable (fx15s-p-0.5sd) with shields-standard (fx15-31p-c) vertical, with shields (fx15-31s-0.5sv) ground plate (fx15s-p-gnd) ragarding the availability of the positions, contact your nearest hirose representative. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
plugs b276 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal no.2 no.1 no.30 no.31 polarizing mark indicator 22.570.15 (27) 9.40.3 18.30.3 (13.45) p=10.1 140.15 p=10.1 150.15 24.60.3 2.70.1 3.70.3 part number fx15s-31p-c fx15s-41p-c fx15s-51p-c cl575-2106-6 cl575-2107-9 cl575-2103-8 31 41 51 27 32 37 24.6 29.6 34.6 22.6 27.6 32.6 18.3 23.3 28.3 14 19 24 15 20 25 yes cl no. number of contacts a rohs yes rohs f e d c b with shields ( fx15-31p-c ) 3.70.3 40.3 b0.3 (a) 9.40.3 d0.3 c0.15 (13.45) 2.70.1 e0.15 p=10.1 p=10.1 f0.15 no.1 no.2 no.n no.n-1 polarizing mark indicator with shields, enhanced shielding ( fx15s- ** p-c ) note 1: packaged in trays. note 2: dimensions in parenthesis ( ) are reference dimensions. note 1: packaged in trays. note 2: dimensions in parenthesis ( ) are reference dimensions. part number fx15-31p-c cl575-2101-2 31 cl no. number of contacts yes rohs part number fx15-31p-c cl575-2101-2 31 cl no. number of contacts the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b277 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal note 1: packaged in trays. note 2: dimensions in parenthesis ( ) are reference dimensions. yes rohs part number fx15sw-31p-c cl575-2113-1 31 cl no. number of contacts c0.3 f0.15 p=10.1 p=10.1 e0.15 no.1 no.n-1 no.2 no.n b0.3 9.550.3 (a) (d) (13) (13.6) 4.20.3 polarizing mark indicator without shields ( fx15m- ** p-c ) part number fx15m-21p-c fx15m-31p-c cl575-2109-4 cl575-2108-1 21 31 24.8 29.8 cl no. number of contacts a b 17.6 22.6 c 13.7 18.7 d 25.8 30.8 e 9 14 f 10 15 g yes rohs 20.5 25.5 note 1: sold in package containing 100 pieces. order by package. note 2: dimensions in parenthesis ( ) are reference dimensions. 40.3 24.60.3 (27) 9.40.3 18.30.3 3.70.3 22.570.15 (13.45) 2.70.1 140.15 p=10.1 p=10.1 150.15 no.1 no.2 no.30 no.31 b 28 a polarizing mark indicator with shields ?enhanced shielding awg#28 to 30 (fx15sw-31p-c) the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b278 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal "b$8 plug crimp contacts ,=% 8( 82 m ) &:
, "$$"$ , "$$" "b$8 "$8 & $!$$$ 9 k4
/ ( ; *
+ n2 5,=% /<9ib*6$%+ /<9i$*6$%+ o$% >$% / ( "b$8 "$8 hhhhhhhhh $% 1$% $%71$% $%1$% *+ 1$% $% 1$% j$% 1$%$ =< ! ): '% =:&
' % applicable cable ( tin plated solid soft strands ) wire strip length: 1.1 to 1.8 mm "$8 / ( ; *
+ n2 5,=% /<9i$*6$%+ /<9i*6$%$b+ o$% $%> >! *=+ 8( d ,=% /8$ " "b$ /8$ " "$ "$ / 8 7$"3$>"$ 7$"3$" 7$"$$$ "3 tools the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b279 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal / 1$% .1$% 8j$% 1$% %1$% =% =% =% =% =% =%" % 1$% */+ 1$% b% 1$% *+ 8 ; 2 plug ?micro-coaxial cable ( fx15sc- ll p-0.5sd ) %7 >%7 7%> 3%> % % $ k4
/ . &:
8(
"38"$%
.
" 8"$%
. , "$" , "b" 3 ,=% =( =82 )% =. *+ % /1$% %3 1$% 1$% %1$% % 1$% ground plate for micro-coaxial cable =82 )% =. *+ % 7% 3% $%$> %$> k4
/ &:
8(
"38"9=.
" 8"9=. , ""> , "" 3 ,=% =( the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b280 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal 1$% 8j$% 1$%$ $%7/ % $ "$% d d e $%> 1$% /<9i>3$ "0 ( a$%$ "$% /1$% 9 ( d=
n2 =( / 3 % b% $ < ; *
+ n2 /<9i>*6$%$ + /<9ib*6$%$3+ /<9i3$*6$%$+ $%$% applicable cable ( micro-coaxial cable ) cable preparation the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b281 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal =% =% =% =%$ ( 8j$% 1$% 1$% 7%b1$% %1$% 31$% %>1$% *>+ *$%b+ $%71$% %b1$% 3%b1$% % 1$% 1$% 1$% % 1$% $%b1$% receptacles vertical, with shields ( fx15-31s-0.5sv ) % $ "$%$ % a$%$ $ "o*#:+ "o%3*,=.+ $%7 $ "$% 3% a$% $ % $ "$% %7 a$% $ % $ "$% >% a$% $ %b1$%$ 1$%$ 8j$% 1$%$ $%1$%$*,+ $% 1$%$*2+ $% a$% $ = #" ) p/ fgfg$%0% p
fg!f(g!fgf g$% 0% / () ( ' '('() % 82 ""!$$$ % 3. *+ % b recommended pcb mounting pattern and metal mask dimensions k4
&:
8( "
"$%
- , "$" ,=% =( the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b282 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal 4.450.1 (3) (0.2) (1.7) 0.50.1 a0.2 p=10.1 p=10.1 c0.15 d0.15 b0.2 e0.3 0.20.05 no.1 no.2 no.n no.n-1 (2.6) (4) polarizing mark indicator 4.40.3 4 5 4 right angle with shields ?enhanced shielding ( fx15s- ** s-0.5sh ) 2 2 2 3 3 l 0 -0.05 4.25 4.15 k0.05 0.50.03 0.250.03(metal mask) j 0 -0.05 h +0.05 0 g 0 -0.05 f +0.05 0 3.55 +0.05 0 2.05 0 -0.05 m +0.05 0 n23.2 0 -0.05 p26.8 +0.05 0 3.7 +0.05 0 1.45 0 -0.05 2.2 +0.05 0 1.7 0 -0.05 3.7 +0.05 0 r 13.85 s 0.30.03(land) note 1 : the coplanarity of the terminal leads is 0.1 mm max. for all signal leads and 0.15 mm max. for the shield leads. 2 : do not place any components in the area indicated. placement of components in this area may affect mating and latch lock operation. 3 : area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : the area marked indicates vacuum pick-and-place area for board placement with automatic equipment. 5 : vacuum pick-up area 6 : packaged on tape-and-reel, 1000 pieces per reel. 7 : dimensions in parenthesis ( ) are reference dimensions. b recommended pcb mounting pattern and metal mask dimensions part number fx15s-31s-0.5sh fx15s-41s-0.5sh fx15s-51s-0.5sh cl575-2306-5 cl575-2307-8 cl575-2303-7 31 41 51 15 20 25 hrs no. number of contacts a b 14 19 24 c 15 20 25 d 27.8 32.8 37.8 e 28.8 33.8 38.8 f 24.8 29.8 34.8 g 21.6 26.6 31.6 h 27.4 32.4 37.4 18 23 28 j k ------ 5.2 5.2 l ------ 8.8 8.8 m 13.2 18.2 23.2 n 16.8 21.8 26.8 p 24.8 29.8 34.8 r 40 45 50 yes s rohs 15 20 25 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b283 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal 4.30.3 4.80.3 (5.5) vacuum pick and place area polarizing mark indicator no.1 no.2 no.n no.n-1 6.550.3 b0.2 d0.15 p=10.1 p=10.1 c0.15 a0.2 0.50.1 0.20.05 6.150.3 right angle, without shields ( fx15m- ** s-0.5sh ) e0.05 0.30.03(land) 0.90.03 3.7 0 -0.05 7.4 +0.05 0 (1.85) 0.250.03(metal mask) 4 g 14 2 f0.05 p=0.50.03 1.9 0 -0.05 3.4 +0.05 0 2 2 part number fx15m-21s-0.5sh fx15m-31s-0.5sh cl575-2309-3 cl575-2308-0 21 31 10 15 hrs no. number of contacts a b 9 14 c 10 15 d 17.9 22.9 e 10 15 f 35 40 g yes rohs 22.4 27.4 note 1 : the co-planarity of all terminal leads is 0.1 mm max. 2 : do not place any components in the area indicated. placement of components in this area may affect mating and latch lock operation. 3 : packaged on tape-and-reel, 1000 pieces per reel. b recommended pcb mounting pattern and metal mask dimensions the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b284 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal 0.180.05 1.50.1 3.10.2 4.450.2 0.50.1 f0.3 1.50.1 (0.25 ) (1.1) p=10.1 g0.15 h0.15 p=10.1 no.1 no.n 4.40.3 p=0.50.1 c0.2 b0.2 e0.2 p=d0.1 a0.3 polarizing mark indicator right angle with shields ?enhanced shielding ( fx15sc- ** s-0.5sh ) pcb mounting pattern : vesa standard 1.550.05 k 5.6 3.50.05 12 5.10.05 j0.05 2.050.05 2.50.05 c0.05 p=0.50.03 n-0.250.03 b0.05 2.50.05 1.550.05 e0.05 p=d0.05 6-1.30.05 no.1 no.n 2 22 3 part number fx15sc-41s-0.5sh fx15sc-51s-0.5sh cl575-2310-2 cl575-2311-5 41 51 32.85 37.85 hrs no. number of contacts a yes rohs b recommended pcb mounting pattern and metal mask dimensions 26 31 b 20 25 c 4 5 d 20 25 e 32.4 37.4 f 19 24 g 20 25 h 29.75 34.75 j 45 50 k note 1 : the coplanarity of the terminal leads is 0.1 mm max. 2 : do not place any components in the area indicated. placement of components in this area may affect mating and latch lock operation. 3 : area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 4 : packaged on tape-and-reel, 1000 pieces per reel. 5 : dimensions in parenthesis ( ) are reference dimensions. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b285 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal e0.3 a0.2 d0.2 p=c0.1 0.50.1 p=0.50.1 1.50.1 0.180.05 no.n b0.2 no.1 5.30.3 4.20.2 5.50.3 vertical with shields ?enhanced shielding ( fx15sc- ** s-0.5sv ) pcb mounting pattern : vesa standard 2 b0.05 a0.05 d0.05 a0.05 p=c0.05 p=0.50.3 n-0.250.03 2.50.05 3.50.05 1.550.05 1.550.05 2.50.05 6-1.30.05 no.1 no.n b recommended pcb mounting pattern and metal mask dimensions 26 31 20 25 4 5 20 25 32.4 37.4 yes a b c d e rohs part number fx15sc-41s-0.5sv fx15sc-51s-0.5sv cl575-2205-8 cl575-2204-5 41 51 cl no. number of contacts note 1 : the coplanarity of the terminal leads is 0.1 mm max. 2 : area indicated by the cross-hatched lines must be free of conductive traces or the conductive traces must be covered by resist film. 3 : packaged on tape-and-reel, 1000 pieces per reel. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b286 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal packaging specifications vertical, with shields ( fx15-31sc-0.5sv ) right angle, with shields-enhanced shielding ( fx15s- ll s-0.5sh ) right angle, without shields ( fx15m- ll s-0.5sh ) reel dimensions / / / / / *3%b+ *$% + *>%+ 5 3$%3 1$% 331$% $% 1$% % 1$% o% a $% $ o% a $% $ 31$% 1$% 1$% /1$% 1$% 1$% o% a$% $ 31$% 1$% *$% + *3%+ *>%+ 5 /1$% 1$% 1$% o% a$% $ 31$% 1$% 1$% *$% + * % + *>% + 5 o1$% *%>+ *ob$+ *ob$+ *.+ 8(
"
"$%
:
"3
"$%
:
"
"$%
: , "$>" , "$"b , "$" 3 $% >% >% :&
=% =( / 3$% % % 33 > > 33% >% >% . 8( "
"$%
: "
"$%
: , "$7" , "$b"$ $% $% :&
=% =( / 3$%3 3$%3 33 33 33% 33% . 8( "
"$%
- , "$" :&
=% =( 33% . the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b287 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal right angle with shields ?enhanced shielding ( fx15sc- ll s-0.5sh ) vertical with shields ?enhanced shielding ( fx15sc- ll s-0.5sv ) reel dimensions /1$% 1$% 1$% o% 31$% 1$% 1$% *$% + *>%+ a$% $ 5 5 *$% + /1$% 1$% 1$% o% a$% $ 31$% 1$% 1$% *+ o1$% *%>+ *ob$+ *ob$+ *4+ 8(
"3
"$%
-
"
"$%
- , "$ "b , "$3" 3 >% >% :&
=% =( / %3 %3 > > >% >% k4
. &:
8(
"3
"$%
:
"
"$%
: , "$" , "" 3 >% >% :&
=% =( / %3 %3 > > >% >% k4
. &:
the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b288 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal 250 150? 180? 3010sec. 9030sec. 230? max 250? time (sec.) sodering (230?min) preheating(150 to 180?) 230 180 25 150 0 100 temperature (?) b recommended temperature profile hrs test conditions test boardglass epoxy 40mm30mm1mm thick solder method :reflow solder composition :paste, 96.5%sn/3%ag/0.5%cu metal mask : 0.12mm thick reflow cycles : 2 cycles the temperature profile is based on the above conditions. in individual applications the actual temperature may vary, depending on solder paste type, volume/thickness and board size/thickness. consult your solder paste and equipment manufacturer for specific recommendations. note: the temperature profile indicates the maximum temperature of the connector surfaces at the highest point from the pcb mounting surface. b cleaning recommendations water based cleaning when using water based cleaning agents (e.g., terpene, alkali saponifiers), select the cleaning agent based on the documentatio n issued by the various manufacturers of cleaning agents which describes its affects on metals, platings and plastics. remove an y moisture after cleaning. residual flux or cleaning agents in the contact areas may affect electrical performance. organic solvent cleaning solvent type room temperature cleaning heated cleaning ipa (isoporopyl alcohol) hcfc (hydrochlorofluorocarbon) yes yes yes yes the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b289 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal precautions and recommendations & ( " " " & ( & ( & ( 1 1 2 3 4 5 1 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b290 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal

*90 + t

"ll8" u 1 2 3 4 precautions and recommendations the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b291 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal minimize the length of outer conductor beyond the ground the bar. 7 length of cutting the extra cable shall be 2.1 mm max. its over length will cause the cable touching the connector body during assembly and cause defective product. minimal length 2.0 mm is a recommended dimension and allowed to be changed if necessary, as long as ensuring good solderability. 3 pre-solder and coat the inner conductor at the cable end. 2. recommended solder for the assembly is flux cored solder with 0.2 mm dia. (lead-free: sn-3ag-0.5cu), 21 mm length. if you consider using additional flux, please pay enough attention not to have flux wicking to the contact area. flux wicking to the contact area will cause contact failure. 3. place the cable to the connector and check the below points before soldering by cable assembly machine. b misalinment of cable end to the terminals in pitch direction 2 excessive floating of cable end 4. follow the recommended temperature profile shown below for the soldering. however, the optimum condition could vary depending on various including type of cable and its length, solder type. therefore r efer to the recommended temperature profile and optimize the condition if necessary. plug C micro-coaxial cable [ coutions for soldring ] 1. for the micro coaxial cable assembled to this connector, cable alignment process as shown in "recommended cable" on the page 1 is required before assembly. b width of ground bar shall be 1.05 mm max. including misalignment of overlapping, flush by cutting, side drop or soldering. using an inadequate cable will interfere the assembly to the connector. forceful assembly and soldering could cause mis-solderi ng to defective product. precautions and recommendations inner conductor outer conductor grounding bar q w w e r solder coating q misalignment in pitch direction w floating 50? 250? 265? pre-heating heating idling 2s 1s 2s 3-4s 220? duration of pressure application solder tip pressurization temperature duration heating 2655? 3~4 sec 13~17n the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b292 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal t u %8()5- *v v+! '((2 ( (% %/ )$()#:&44e=.e%!,#.%) ' % x 5-0 % %& % 3%50 )(! !( ((2% %/ !2 % 40 '(% precautions and recommendations / / //
( / $ " % $ "$%3 % $ "$% 4' / 3 % b% =( / the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b293 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal %2 0 ()2)) % t
u %
(( () ( (2 % t () u %/ ) '
"38"9=.(() % %8 ;) ( % precautions and recommendations 8 ( / 9 *
"38"9=.+ q w e the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b294 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal precautions and recommendations connectors packaging triangle mark mating mating arrow mark triangle mark center mark center mark packaging of the complete cable assemblies exercise caution as not to tangle, twist or deform the complete cable assemblies when packaging. special care should be taken n ot to apply any excessive pull forces to the individual wires. when removing the cable assemblies from the packaging do not pull on the wires. make sure that the latch-locks are not interfer ing with packaging. mating of the connectors the connectors have built-in polarizing feature and will not mate when reversed. do not try forced mating. align the connectors as shown on the illustration below and fully insert the plug into the receptacle. confirm that both latch- locks are fully engaged. the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b295 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal precautions and recommendations 2 1 1 1 1 1 1 the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
b296 fx15 series 1mm pitch cable-to-board connectors supporting lvds signal technical information ( fx15s series ) eye pattern waveforms ( 700 mhz ) shielding effectiveness ( shielding characteristics comparison using a 2-chamber shielded room ) notes:the measurement value of "without plug-side shields + without receptacle-side shields are taken as the zero level of the graph vertical axis db. the respective results express the noise suppression effect (db) as a relative comparison value with this "without shields condition as the reference. with cable-side shields + with pcb-side shields with cable-side shields + without pcb-side shields without cable-side shields + with pcb-side shields without cable-side shields + without pcb-side shields ? (0 db line) 60 50 40 30 20 10 0 -10 0.1 0.15 0.2 0.3 0.4 0.5 0.6 0.7 0.8 0.9 1 1.5 2 frequency (ghz) shielding effect (db) measured shielding effectiveness for frequencies from 100 mhz to 2 ghz. shielded connectors show noise suppression of 10 db to 20 db, when compared with connectors without the shields. 1 m cable length 1.5 m cable length the product information in this catalog is for reference only. please request the engineering drawing for the most current and accurate design information. all non-rohs products have been discontinued, or will be discontinued soon. please check the products status on the hirose website rohs search at www.hirose-connectors.com, or contact your hirose sales representative.
mouser electronics authorized distributor click to view pricing, inventory, delivery & lifecycle information: hirose electric: ? ap105-fx15-3032? fx15-3032pcfa? fx15-2830pcfb? fx15-3032pcfb? fx15-31p-c? fx15s-51p-c? fx15s-31p-c ? fx15s-41p-c? fx15s-41p-c(61)? fx15m-31p-c? fx15m-21p-c? fx15s-41p-0.5sd? fx15s-41p-gnd? fx15sw- 31p-c? fx15s-51p-gnd? fx15s-51p-0.5sd? fx15-31s-0.5sv? fx15sc-51s-0.5sv? fx15sc-41s-0.5sv? fx15s-51s- 0.5sh? fx15s-31s-0.5sh? fx15s-41s-0.5sh? fx15m-31s-0.5sh? fx15m-21s-0.5sh? fx15sc-51s-0.5sh? fx15s- 31s-0.5sh(30)? fx15m-31s-0.5sh(30)? fx15-31s-0.5sv(30)? fx15m-21s-0.5sh(30)? fx15s-51p-0.5fc? fx15s-51p- gnd(a)

▲Up To Search▲

Price & Availability of FX15SC-51S-05SH

	To Download FX15SC-51S-05SH Datasheet File
If you can't view the Datasheet, Please click here to try to view without PDF Reader .